Video Update for “Pump performance curves”

In the initial “Pump performance curves ” post I had forgotten who I had learned it from. It turns out to have been John Cimbala and Laura Pauley from Penn State. They have kindly passed on the videos they showed at the 2007  APS-DFD meeting in Salt Lake City. The full videos are linked here, here, and here. GIFS are below. It is so simple but there is so much in it. This is one of my favorite labs we do now.

pump-performance-experiment-00_00_00-00_00_57 pump_take_home_experiment-00_00_00-00_00_27 shut-off_head_demonstration-00_00_00-00_00_23



An index of all the demonstrations posted on this blog can be found here. Don’t forget to follow @nbkaye on twitter for updates to this blog. If you have a demonstration that you use in class that you would like to share on this blog please email me (nbkaye@clemson.edu). I also welcome comments (through the comments section or via email) on improving the demonstrations.

Pump efficiency calculations

Just a quick note on an extension of the pump performance curves demonstration that was suggested by Ed Maurer of SCU. The initial demonstration had students calculate the head rise – flow rate relationship for a cheap aquarium pump. Ed extended this with the addition of an inline power meter (such as the Kill A Watt meter). Simply record the power consumed (P in watts) for each flow rate (Q) and pump head rise (Ep=height over which water is pumped plus tubing and exit head loss) . The efficiency can then be calculated as

η=γQEp/P.

You can then plot the pump efficiency against flow rate on the same plot as the head rise vs flow rate. When Ed Maurer did this he reported very low efficiency peaking around 20%. This is not terribly surprising as they are cheap pumps (typically only cost around $20).


An index of all the demonstrations posted on this blog can be found here. Don’t forget to follow @nbkaye on twitter for updates to this blog. If you have a demonstration that you use in class that you would like to share on this blog please email me (nbkaye@clemson.edu). I also welcome comments (through the comments section or via email) on improving the demonstrations.

Video of “Pump performance curves” demonstration

Here are some videos of the “Pump performance curves” demonstration. The full videos are linked from the GIF descriptions.

measuring the static head

static

measuring the flow rate

flowrate

An index of all the demonstrations posted on this blog can be found here. Don’t forget to follow @nbkaye on twitter for updates to this blog. If you have a demonstration that you use in class that you would like to share on this blog please email me (nbkaye@clemson.edu). I also welcome comments (through the comments section or via email) on improving the demonstrations.